Differents b/w hubs and switches

2006-11-23T01:46:00.000-08:00

Hub

A common connection point for devices in a network. Hubs are commonly

used to connect segments of a LAN. A hub contains multiple ports. When

a packet arrives at one port, it is copied to the other ports so that all

segments of the LAN can see all packets.

Switch

In networks, a device that filters and forwards packets between LAN

segments. Switches operate at the data link layer (layer 2) and sometimes

the network layer (layer 3) of the OSI Reference Model and therefore

support any packet protocol. LANs that use switches to join segments are

called switched LANs or, in the case of Ethernet networks, switched Ethernet

LANs.

General Terms

2006-11-23T00:48:00.000-08:00

Some technicians have a tendency to use the terms routers, hubs and switches interchangeably. One minute they're talking about a switch. Two minutes later they're discussing router settings. Throughout all of this, though, they're still looking at only the one box. Ever wonder what the difference is among these boxes? The functions of the three devices are all quite different from one another, even if at times they are all integrated into a single device. Which one do you use when? Let's take a look...
Hub, Switches, and Routers: Getting Started with Definitions
HubA common connection point for devices in a network. Hubs are commonly used to connect segments of a LAN. A hub contains multiple ports. When a packet arrives at one port, it is copied to the other ports so that all segments of the LAN can see all packets.
SwitchIn networks, a device that filters and forwards packets between LAN segments. Switches operate at the data link layer (layer 2) and sometimes the network layer (layer 3) of the OSI Reference Model and therefore support any packet protocol. LANs that use switches to join segments are called switched LANs or, in the case of Ethernet networks, switched Ethernet LANs.
RouterA device that forwards data packets along networks. A router is connected to at least two networks, commonly two LANs or WANs or a LAN and its ISP.s network. Routers are located at gateways, the places where two or more networks connect. Routers use headers and forwarding tables to determine the best path for forwarding the packets, and they use protocols such as ICMP to communicate with each other and configure the best route between any two hosts.
Key Terms To Understanding Storage Servers:
LANA computer network that spans a relatively small area. Most LANs are confined to a single building or group of buildings.
WANA computer network that spans a relatively large geographical area. Typically, a WAN consists of two or more local-area networks (LANs).
networkA group of two or more computer systems linked together.
MAC addressShort for Media Access Control address, a hardware address that uniquely identifies each node of a network.
OSIShort for Open System Interconnection, an ISO standard for worldwide communications that defines a networking framework for implementing protocols in seven layers.
The Differences Between These Devices on the NetworkToday most routers have become something of a Swiss Army knife, combining the features and functionality of a router and switch/hub into a single unit. So conversations regarding these devices can be a bit misleading — especially to someone new to computer networking. The functions of a router, hub and a switch are all quite different from one another, even if at times they are all integrated into a single device. Let's start with the hub and the switch since these two devices have similar roles on the network. Each serves as a central connection for all of your network equipment and handles a data type known as frames. Frames carry your data. When a frame is received, it is amplified and then transmitted on to the port of the destination PC. The big difference between these two devices is in the method in which frames are being delivered. In a hub, a frame is passed along or "broadcast" to every one of its ports. It doesn't matter that the frame is only destined for one port. The hub has no way of distinguishing which port a frame should be sent to. Passing it along to every port ensures that it will reach its intended destination. This places a lot of traffic on the network and can lead to poor network response times.

pleasent

Differents b/w hubs and switches

General Terms